MTS Technik Street Suspension - Adjustable Coilovers w. Eibach Springs for BMW 1 2 3 & 4 Series F20 F21 F22 F23 F30 F32 F87 25mm-55mm

$1,524.99 AUD

شامل الضريبةالشحن محسوبة عند السداد

MTS Technik SKU: MTSGWBM24 (61508012)

متوفر في الوقت الحاضر!

BIG INVENTORY
MODE is Australia's Largest Retailer & Wholesaler of Performance & Aesthetic Parts & accessories for European vehicles.

Coilover Kit BMW 1 2 3 & 4 Series F20 F21 F22 F23 F30 F32 F87

Coilover Kit MTS Technik for BMW 1 Series / F20 Hatchback, lowering the front axle between 25 - 55 mm, and rear between 30 - 60 mm. Dedicated for the years of: 07/11 - 06/19, for the engine version: 114 / 116 / 118 / 120 / 125 / 114d / 116d / 118d / 120d / 125d.

Coilover Kit MTS Technik for BMW 1 Series / F21 Hatchback, lowering the front axle between 25 - 55 mm, and rear between 30 - 60 mm. Dedicated for the years of: 12/11 -, for the engine version: 114 / 116 / 118 / 120 / 125 / 114d / 116d / 118d / 120d / 125d.

Coilover Kit MTS Technik for BMW 2 Series / F22, F87 Coupe, lowering the front axle between 25 - 55 mm, and rear between 30 - 60 mm. Dedicated for the years of: 10/12 -, for the engine version: 218 / 220 / 228 / 230 / 218d / 220d / 225d.

Coilover Kit MTS Technik for BMW 2 Series / F23 Cabriolet, lowering both axles between 40 - 70 mm. Dedicated for the years of: 03/14 -, for the engine version: 218i / 220i / 228i / 230i / M 235i / M 240i / 218d / 220d / 225d.

Coilover Kit MTS Technik for BMW 3 Series / F30 Sedan, lowering the front axle between 40 - 70 mm, and rear between 30 - 65 mm. Dedicated for the years of: 11/11 - 10/18, for the engine version: 316i / 318i / 320i / 328i / 330i / 335i / 340i / 316d / 318d / 320d / 325d / 330d / 335d.

Coilover Kit MTS Technik for BMW 4 Series / F32 Coupe, lowering the front axle between 40 - 70 mm, and rear between 30 - 65 mm. Dedicated for the years of: 07/13 -, for the engine version: 418i / 420i / 428i / 430i / 435i / 440i / 418d / 420d / 425d / 430d / 435d.

2 years warranty 2 year warranty with no mileage limit to confirm high quality.
High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
Anti-corrosion protection yellow galvanized Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.
CAR:
Make
BMW
Model
1 Series / F20 Hatchback  / F21 Hatchback
2 Series / F22, F87 Coupe
Type
F20 F21 F22 F87
Engine
114 / 116 / 118 / 120 / 125 / 114d / 116d / 118d / 120d / 125d /218 / 220 / 228 / 230 / 218d / 220d / 225d
Year
07/11 - 06/19, 10/12 -
TECH SPECS:
Series: street
Max. Axle Load FA:
921 - 1090 kg
Max. Axle Load RA:
1230 kg
Lowering FA:
25 - 55 mm
Lowering RA:
30 - 60 mm
Coilover Main Spring (Front):
Spring rate (30 - 45 N/mm)
Coilover Helper Spring (Front):
Spring rate (20 N/mm)
Coilover Main Spring (Rear):
Spring rate (84 N/mm)
TUV Certificate:
yes
Download instruction: Download instruction
Download installation manual: Download installation manual
Download TUV Certificate: Download TUV Certificate

CAR:
Make
BMW
Model
2 Series / F23 Cabriolet
Type
F23
Engine
218i / 220i / 228i / 230i / M 235i / M 240i / 218d / 220d / 225d
Year
03/14 -
TECH SPECS:
Series: street
Max. Axle Load FA:
1005 kg
Max. Axle Load RA:
1230 kg
Lowering FA:
40 - 70 mm
Lowering RA:
40 - 70 mm
Coilover Main Spring (Front):
Spring rate (30 - 45 N/mm)
Coilover Helper Spring (Front):
Spring rate (20 N/mm)
Coilover Main Spring (Rear):
Spring rate (84 N/mm)
TUV Certificate:
yes
Download instruction: Download instruction
Download installation manual: Download installation manual
Download TUV Certificate:

Download TUV Certificate


CAR:
Make
BMW
Model
3 Series / F30 Sedan
4 Series / F32 Coupe
Type
F30 F32
Engine
316i / 318i / 320i / 328i / 330i / 335i / 340i / 316d / 318d / 320d / 325d / 330d / 335d /418i / 420i / 428i / 430i / 435i / 440i / 418d / 420d / 425d / 430d / 435d
Year
11/11 - 10/18, 07/13 -
TECH SPECS:
Series: street
Max. Axle Load FA:
951 - 1090 kg
Max. Axle Load RA:
1230 kg
Lowering FA:
40 - 70 mm
Lowering RA:
30 - 65 mm
Coilover Main Spring (Front):
Spring rate (30 - 45 N/mm)
Coilover Helper Spring (Front):
Spring rate (20 N/mm)
Coilover Main Spring (Rear):
Spring rate (84 N/mm)
TUV Certificate:
yes
Download instruction: Download instruction
Download installation manual: Download installation manual
Download TUV Certificate: Download TUV Certificate
PRODUCT NOTES
3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
8 - Not for 4x4.
21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
32 - In some cases additional OE-parts for the installation of the suspension components are required. Those are not included in the set.
33 - Including M-Technik.

MATCHES TO

Make  Model Engine Year
BMW 2 Series / F23 Cabriolet
218i / 220i / 228i / 230i / M 235i / M 240i / 218d / 220d / 225d
03/14 -
BMW
4 Series / F32 Coupe
418i / 420i / 428i / 430i / 435i / 440i / 418d / 420d / 425d / 430d / 435d
07/13 -
BMW
2 Series / F22, F87 Coupe
218 / 220 / 228 / 230 / 218d / 220d / 225d
10/12 -
BMW
3 Series / F30 Sedan
316i / 318i / 320i / 328i / 330i / 335i / 340i / 316d / 318d / 320d / 325d / 330d / 335d
11/11 - 10/18
BMW
1 Series / F20 Hatchback
114 / 116 / 118 / 120 / 125 / 114d / 116d / 118d / 120d / 125d
07/11 - 06/19
BMW
1 Series / F21 Hatchback
114 / 116 / 118 / 120 / 125 / 114d / 116d / 118d / 120d / 125d
12/11 -

THE IMAGE/S OF THIS PRODUCT MAY BE EXACT OR GENERIC AND ARE INTENDED FOR ONLINE VISUAL REFERENCE ONLY AND MAY NOT REFLECT THE ACTUAL CONTENTS, ACCESSORIES OR CONFIGURATION OF THE PRODUCT.
GENERALLY ALL KITS WILL INCLUDE NECESSARY ITEMS TO INSTALL OR RE-USE ORIGINAL PARTS INCLUDING BOLTS, SCREWS, ETC. FOR INSTALLATION. IF YOU ARE UNSURE PLEASE CONTACT US PRIOR TO PURCHASING.

OUR MODE.

MODE™ Strives to push the boundaries in automotive modification, styling and tuning by creating individualised vehicles that are truly one of a kind. These days cars have become a staple in our everyday lives. No matter what we drive, there is usually some or even many more of the exact same car out there. What we drive has become more and more a reflection of ourselves and our individuality. Seeing this we created a new concept in automotive modification in Australia.Each purchase made online can be delivered directly to your door or to one of our authorised MODE™ dealers for fitting & installation service plus in store advice, software tuning, coding and personalisation to your vehicle.MODE™ is the master distributor to some of the World’s largest and most exclusive automotive brands with an extensive dealer network to ensure that no matter where you are we can deliver that signature MODE™ experience, an experience you will never forget.

WHAT'S YOUR MODE?

MODE+ Rewards

 

MODE+ Rewards Loyalty Program is a points-based program through which our valued customers (like you!) can earn and redeem points.

Need help signing up? Click here

By joining the points programme, you agree to be bound by these terms and conditions. MODE Auto Concepts may, in its sole discretion, alter, limit, or modify regulations and benefits, without prior notice except as expressly set out in these terms.

 

 

Terms and Conditions

  1. Your points and rewards have no cash value and may not be exchanged for cash.

  2. Under the points programme, one point will be rewarded for every $1 AUD spent on eligible purchases of products on our website. The current redemption value of the reward points is 1 point = 1 cent.

  3. All Reward Points will expire 1 year from the date they were awarded to your account, following which such unused and expired reward points will be automatically deducted from the balance of your reward points at the relevant time and you will no longer be able to access or use them.

  4. If, after you have earned reward points on a product, you later require a refund, the reward points you earned in respect of the refunded product will be deducted from your account when the products have been received by us and your payment has been refunded.

  5. Reward points are for your personal use only and cannot be transferred, brought, sold or in any way traded.

  6. You can check your points and rewards on your online account. In case of any inconsistency between the membership points reflected in your account and our internal records, the latter shall prevail.

  7. To spend reward points on our website, you must log in to your customer account before selecting the products you wish to purchase. When you enter your payment details, select how many reward points you wish to redeem from the options available.

  8. If you have applied points towards an order, and you wish to partially cancel items off the order, the reward points will be partially refunded as well for your future orders.
For more information, please contact us at store@modeautoconcepts.com