Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, 340i(x), M340i(x) & 440i)

$2,698.99 AUD

شامل الضريبةالشحن محسوبة عند السداد

Eventuri SKU: EVE-B58-CF-INT

متوفر في الوقت الحاضر!

BIG INVENTORY
MODE is Australia's Largest Retailer & Wholesaler of Performance & Aesthetic Parts & accessories for European vehicles.

BMW M140i / M240i / 340i / 440i /M340i

Performance Increase : 12-15hp, 14-18ft-lb

The B58 Eventuri intake system is another example of our “Complete System” principal. It demonstrates the perfect balance between allowing for unrestricted airflow with our open filter housing whilst maintaining low IAT by cold air saturation with our scoop and shield combination. Every detail has been meticulously developed from the prepreg carbon pieces to the double layer heat shields. This intake sets a new benchmark in design and craftsmanship for the B58 platform.

The Eventuri Difference

The B58 Eventuri system uses our Patent Pending Carbon fibre Housing which provides an aerodynamically efficient airflow path from the filter to the turbo. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect and maintains laminar flow conditions to reduce the drag on the turbo. You can read more about housing design and how it works HERE.

Features

The Eventuri B58 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. Here are the details for each component and the design ethos behind them:

Each intake system consists of:

  • Prepreg Carbon Filter Housing and integrated MAF tube
  • High Flow Double Cone Air Filter
  • Aluminium Cowl for smooth airflow entry
  • Prepreg Carbon Scoop
  • Prepreg Carbon filter shroud
  • CNC Machined MAF Boss
  • Double layer main heat shield
  • Double layer secondary shield
  • Laser Cut Mounting Brackets

    Carbon Intake Housing Assembly

    Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, M340i & M440i) - ML Performance UK

    The filter housing comprises of a high flow filter, aluminium cowl, laser cut bracket, carbon heat shroud and the carbon pod itself, which extends to incorporate the MAF sensor and turbo tube. The carbon pod shrouds the reverse mounted filter and smoothly shapes the airflow down to the integrated MAF intake tube. This smooth reduction in cross sectional area invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack - below is a diagram to show the comparison between our patent pending design and a regular intake system. The carbon filter housing and the inlet tube have been integrated to be 1 continuous piece. This reduces the number of internal interfaces and allows for smoother airflow to the turbo. The diameter of the tube smoothly transitions from the required diameter at the MAF sensor end to the larger diameter of the turbo inlet. Further details on the patent pending housing can be read in the Technology page.

    Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, M340i & M440i) - ML Performance UK

    Carbon Heat Shroud

    Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, M340i & M440i) - ML Performance UK

    The Carbon filter housing is mated to a carbon heat shroud and an additional aluminium shield which stop the convective heat from the exhaust manifold saturating the filter. This coupled with our comprehensive double layered heat shields combine to provide a very effective cold area around the filter opening.

    Carbon Fibre Intake Scoop

    Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, M340i & M440i) - ML Performance UK

    Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, M340i & M440i) - ML Performance UK

    The scoop was designed for maximum efficiency in directing the incoming air to the stock duct openings. Many aftermarket scoops have a large flat area almost perpendicular to the oncoming air - not great for channelling it into the ducts as the airflow just "hits" this flat portion and creates turbulence.

    The Eventuri Scoops have been designed to sit directly behind the front grills to capture as much air as possible and with a continuous curve to the duct opening to ensure this airflow is efficiently channelled. The following video explains the design features behind our M2 scoop which directly apply to the B58 scoop. Having an effective cold air feed to the filter is an essential part of our design. Simply having some heat shields alone would result in elevated inlet air temperatures as the engine bay soaks with heat - especially on this engine since the manifold is directly next to the intake.

    Main Heat Shield

    Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, M340i & M440i) - ML Performance UK

    Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, M340i & M440i) - ML Performance UK

    A lot of attention was placed on the heat shielding since the intake is located next to the exhaust manifold. For this, we used a double layer main shield with a silver finish on the exhaust side and black on the intake side. The silver layer reflects radiant heat from the exhaust and the black layer absorbs and radiant heat on the inlet side. The air gap between the two layers acts as an insulator to stop the conductive heat spreading to the inner layer. The secondary shield can also be seen in the above photo behind the turbo inlet pipe. During testing, we found a temperature drop of over 90 degrees C across the shield which can be clearly seen in the thermal imaging video below. The effectiveness of the shield results in low inlet air temperatures whilst on the move.

    Secondary Heat Shield

    Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, M340i & M440i) - ML Performance UK

    The final shield mounts above the exhaust manifold and wraps around to protect the turbo inlet from direct heat saturation. Similar to the main shield - this is another double layer configuration with a silver layer on the exhaust side and a black layer on the inlet tube side.

    Dyno Graph (Click to enlarge)

    Below is a dyno graph showing the comparison between the Eventuri and the stock airbox on a standard B58 M240i. As you can see, power and torque are increased through a large portion of the rpm range. This translates on the road to increased part throttle and full throttle response with the car pulling much more eagerly to the redline. At peak RPM the power curve for the intake merges with the stock airbox - this is due to the fact that on the dyno, the intake relies on the fan to push air through the scoop and into the filter. At high RPM the fan is simply inadequate in providing the required airflow - on the road this would not be a problem and we would expect the intake to continue making power gains up to the redline. The testing was done on the same day back-to-back and temperatures were monitored to ensure consistency.

    Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, M340i & M440i) ML Performance UK

    B58 M240i drive-by Eventuri intake

    Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, M340i & M440i) - ML Performance UK Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, M340i & M440i) - ML Performance UK

    Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, M340i & M440i) - ML Performance UK

    Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, M340i & M440i) - ML Performance UK

    Eventuri BMW B58 Carbon Performance Intake (M140i, M240i, M340i & M440i) - ML Performance UK

    Compatibility Check

    To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number (AUS) or the last 7 digits of your VIN. Simply enter your car details prior to checkout.

    Compatibility

    BMW 1 Series F20/F21 B58 M140i

    BMW 2 Series F22/F23 B58 M240i

    BMW 3 Series F30/F31 B58 340i and 340ix

    BMW 3 Series G20/G21 B58 M340i and M340ix

    BMW 4 Series • 2016+ F32 B58 440i

    Warranty

    One Year Eventuri Warranty

    Manufactured by

    Eventuri

    Part Number

    EVE-B58-CF-INT

    EVENTURI BMW B58 CARBON PERFORMANCE INTAKE (M140I, M240I, 340I & 440I) - ML Performance UK

    OUR MODE.

    MODE™ Strives to push the boundaries in automotive modification, styling and tuning by creating individualised vehicles that are truly one of a kind. These days cars have become a staple in our everyday lives. No matter what we drive, there is usually some or even many more of the exact same car out there. What we drive has become more and more a reflection of ourselves and our individuality. Seeing this we created a new concept in automotive modification in Australia.Each purchase made online can be delivered directly to your door or to one of our authorised MODE™ dealers for fitting & installation service plus in store advice, software tuning, coding and personalisation to your vehicle.MODE™ is the master distributor to some of the World’s largest and most exclusive automotive brands with an extensive dealer network to ensure that no matter where you are we can deliver that signature MODE™ experience, an experience you will never forget.

    WHAT'S YOUR MODE?

    MODE+ Rewards

     

    MODE+ Rewards Loyalty Program is a points-based program through which our valued customers (like you!) can earn and redeem points.

    Need help signing up? Click here

    By joining the points programme, you agree to be bound by these terms and conditions. MODE Auto Concepts may, in its sole discretion, alter, limit, or modify regulations and benefits, without prior notice except as expressly set out in these terms.

     

     

    Terms and Conditions

    1. Your points and rewards have no cash value and may not be exchanged for cash.

    2. Under the points programme, one point will be rewarded for every $1 AUD spent on eligible purchases of products on our website. The current redemption value of the reward points is 1 point = 1 cent.

    3. All Reward Points will expire 1 year from the date they were awarded to your account, following which such unused and expired reward points will be automatically deducted from the balance of your reward points at the relevant time and you will no longer be able to access or use them.

    4. If, after you have earned reward points on a product, you later require a refund, the reward points you earned in respect of the refunded product will be deducted from your account when the products have been received by us and your payment has been refunded.

    5. Reward points are for your personal use only and cannot be transferred, brought, sold or in any way traded.

    6. You can check your points and rewards on your online account. In case of any inconsistency between the membership points reflected in your account and our internal records, the latter shall prevail.

    7. To spend reward points on our website, you must log in to your customer account before selecting the products you wish to purchase. When you enter your payment details, select how many reward points you wish to redeem from the options available.

    8. If you have applied points towards an order, and you wish to partially cancel items off the order, the reward points will be partially refunded as well for your future orders.
    For more information, please contact us at store@modeautoconcepts.com