MODE x MMR Performance Crank Hub & Capture Bundle for BMW M3 F80 M4 F82 F83 & M2 Competition F87 S55

$2,849.90 AUD $3,362.71 AUD يحفظ $512.81 AUD

شامل الضريبةالشحن محسوبة عند السداد

Assembled by MODE™️ SKU: MMR-CHB-S55 الباركود: 70x44x14

متوفر في الوقت الحاضر!

BIG INVENTORY
MODE is Australia's Largest Retailer & Wholesaler of Performance & Aesthetic Parts & accessories for European vehicles.

وصف ABOUT MODE. MODE+ Rewards

NOTE: There is no drilling into the crankshaft required to install this kit.

What is a Crank Hub?

Issues relating to the standard three-piece crank hub on the S55 engine are widely known, but these are fully addressed with the installation of the MMR Performance one-piece billet crank hub and capture plate.

The OE units friction plate are known to slip, causing the timing to alter enough that piston-to-valve contact can occur and, if not totally standard and within the warranty period, leaves owners with a very expensive repair bill!

MMR have become know of this problem, having experienced this issue twice themselves, so they were committed to develop a product that would ensure owners of standard power outputs have complete peace of mind, as much as those that wish to increase the power and torque output without having to worry; MMR have engineered the most comprehensive solution on the market and at one of the most compelling price points. 

The MMR Performance one-piece crank hub is machined from billet EN36 that's been heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. 

The one-piece design ensures the friction plates can't slip and with a new crank bolt tightened appropriately, this alone delivers a substantial improvement in reliability versus the OE version.

For the ultimate solution, which then also removes the possibility for this bolt to be able to loosen, MMR have engineered an additional billet aluminium capture plate that securely houses the whole head of the crank bolt, making it impossible for it to come undone.  

Careful design has also allowed MMR to develop a solution that's easy to install compared to some other products as there's no drilling or modification required to the OE crankshaft, which saves you time and ultimately money, too.

Why do I need it?

If your BMW M3 F80, M4 F82, F83 or M2 Competition F87 S55 is modified or heavily modified installing the MMR Crank Hub is highly recommended. A spun crank can lead to engine failure with repair costs in excess of $20,000 or if slightly luckier broken down until vehicle is sent back to dealer or workshop for the crank hub to be replaced anyway and the engine retimed.

The SCH (Spun Crank Hub) failure has been seen on both stock and modified S55 engines. If you are modifying your car, doing track work or driving hard then upgrading the crank hub in your S55 powered M car is a fail safe you will not regret.

100% Bulletproof.

As it stands there is a 100% success rate of the MMR Crank Hub.

 MODE x MMR Performance Crank Hub Bundle Includes:

  • MMR Performance Crank Hub (Part No. MMR20-1003FK)

  • MMR Crank Bolt Capture (Part No. MMR20-1002)

  • Genuine BMW Parts OEM Crank Bolt (Part no. BM-11217614270)

  • Genuine BMW Parts OEM Valve Cover Gasket (Part no. BM-11127587804)

  • Genuine BMW Parts OEM Cam Bolts (2) (Part no. BM-11367524954)

  • Genuine BMW Parts OEM Engine Inspection Plug (2) (Part no. BM-11117849396)

  • Genuine BMW Parts OEM Front Main Seal (Part no. BM-11118618864)

  • Genuine BMW Parts OEM Brake Booster Vaccum Pump Seal Cap (Part no. BM-11117530262)

  • Genuine BMW Parts OEM Oil Pump Chain Tensioner Access Cap (Part no. BM-11117615131)

  • Genuine BMW Parts OEM Sump Gasket (Part no. BM-11137600482)

  • Genuine BMW Parts OEM Sump Bolts (Part no. BM-11132210959)

  • MAHLE or MANN Filter Oil Filter

Installation:

Installation of any crank hub solution is extensive and must be carried out by highly qualified technicians only, the oil pan, valve covers, subframe, steering and suspension must be removed and re-installed. BMW-Specific specialty tools are required in order to set the engine cam and valve timing.

WARNING: Improper installation may cause irreversible engine damage.

Please Click Here to locate a dealer in your area.

Installation Tips:

  1. This is a great time to upgrade your turbos as everything is out of the way, Click here to browse our range of upgraded Pure Turbos.
  2. For high output or high km builds it is also a great time to replace the rod bearings, everything is out of the way and ready to go for a very quick and easy installation.
  3. Many components, bolts and hardware are single-use only, please ensure no bolts are re-used during this installation that should not be.
  4. The oil system must be primed prior to re-starting the engine due to the crankcase being opened up and pressure being released.

Applications:

  • BMW M3 F80 (2014-2018)

  • BMW M3 F80 Competition (2016-2018)

  • BMW M4 F82/F83 (2014-2020)

  • BMW M4 F82/F83 Competition (2016-2020)

  • BMW M4 GTS (2016)
  • BMW M2 CS (2020)

  • BMW M2 Competition F87 (2018-2020)

    Recommended Specialty Items:

    • Crankshaft Alignment S55 Timing Tool Kit

    Supplemental Kit Instructions (To use as a guideline)

      ATTENTION: MODE Auto Concepts, MMR Performance assume no liability on the use or improper installation of this product. Product is for off-road / racing use only.

      OUR MODE.

      MODE™ Strives to push the boundaries in automotive modification, styling and tuning by creating individualised vehicles that are truly one of a kind. These days cars have become a staple in our everyday lives. No matter what we drive, there is usually some or even many more of the exact same car out there. What we drive has become more and more a reflection of ourselves and our individuality. Seeing this we created a new concept in automotive modification in Australia.Each purchase made online can be delivered directly to your door or to one of our authorised MODE™ dealers for fitting & installation service plus in store advice, software tuning, coding and personalisation to your vehicle.MODE™ is the master distributor to some of the World’s largest and most exclusive automotive brands with an extensive dealer network to ensure that no matter where you are we can deliver that signature MODE™ experience, an experience you will never forget.

      WHAT'S YOUR MODE?

      MODE+ Rewards

       

      MODE+ Rewards Loyalty Program is a points-based program through which our valued customers (like you!) can earn and redeem points.

      Need help signing up? Click here. 

      By joining the points programme, you agree to be bound by these terms and conditions. MODE Auto Concepts may, in its sole discretion, alter, limit, or modify regulations and benefits, without prior notice except as expressly set out in these terms.

       

       

      Terms and Conditions

      1. Your points and rewards have no cash value and may not be exchanged for cash.

      2. Under the points programme, one point will be rewarded for every $1 AUD spent on eligible purchases of products on our website. The current redemption value of the reward points is 1 point = 1 cent.

      3. All Reward Points will expire 1 year from the date they were awarded to your account, following which such unused and expired reward points will be automatically deducted from the balance of your reward points at the relevant time and you will no longer be able to access or use them.

      4. If, after you have earned reward points on a product, you later require a refund, the reward points you earned in respect of the refunded product will be deducted from your account when the products have been received by us and your payment has been refunded.

      5. Reward points are for your personal use only and cannot be transferred, brought, sold or in any way traded.

      6. You can check your points and rewards on your online account. In case of any inconsistency between the membership points reflected in your account and our internal records, the latter shall prevail.

      7. To spend reward points on our website, you must log in to your customer account before selecting the products you wish to purchase. When you enter your payment details, select how many reward points you wish to redeem from the options available.

      8. If you have applied points towards an order, and you wish to partially cancel items off the order, the reward points will be partially refunded as well for your future orders.
      For more information, please contact us at store@modeautoconcepts.com