Go Fast Bits Audi/VW VTA BLow-Off Valve (Inc. RS3 8V / TT RS 8J / MK5 Golf GTI / B8 S4)

$230.00 AUD

شامل الضريبةالشحن محسوبة عند السداد

GFB (Go Fast Bits) SKU: T9451 الباركود: 9328022000138

متوفر في الوقت الحاضر!

BIG INVENTORY
MODE is Australia's Largest Retailer & Wholesaler of Performance & Aesthetic Parts & accessories for European vehicles.

وصف ABOUT MODE. MODE+ Rewards

Description

The VTA is a performance blow-off valve solution for Audi, VW, Skoda and SEAT vehicles with an electronic factory diverter valve.


If you want sound with your performance (or performance with your sound!), GFB’s VTA delivers just that! By combining the proven performance benefits of our ground-breaking DV+ with atmosphere venting, the VTA delivers an aggressive blow-off sound, improved throttle response and boost recovery, as well as superior boost holding and reliability in extreme conditions.

The VTA shares the successful DV+ design philosophy: “Keep what works, replace what doesn’t”

This means we retain ECU control and the solenoid from the factory diverter to ensure the fastest possible response time, without the added and unnecessary cost of replacing the solenoid like some brands do. The weak part of the factory diverter has always been the plastic valve mechanism – this is the part we replace. The VTA features CNC machined billet components that last a lifetime, and we also change the valve operation method for better performance. The factory diverter valve can only operate in two states – open, or closed. When it opens fully at low boost, or during a partial throttle lift mid-corner, it causes increased lag and a noticeably non-linear boost transition.

GFB pioneered the use of “pilot operation” in the DV+, which works by repurposing the factory solenoid to control the pressure behind the piston rather than the piston itself. This allows the solenoid stroke to be much shorter, speeding up the response time and increasing the actuation force. More importantly, it allows the piston to open and close progressively in response to the amount of boost pressure present, which smooths boost transitions and reduces the lag caused by the factory diverter valve.

It is this design philosophy that makes the VTA not only the best performing blow off valve solution, but also the best value on the market.

 

Please note: Torque settings for the VTA bolts are 7Nm (as per the standard part). Overtightening of these bolts can damage the valve and lead to operational issues.

 

VTA or DV+?

Depends if you want sound or not. Both valves are constructed with the same quality materials and valve mechanism, and both offer the same performance and reliability benefits. However, the VTA vents to atmosphere for sound whilst the DV+ recirculates the air to keep it quiet.

 

Why choose a VTA over a “BOV spacer”?

“BOV spacers” are cheap and they make sound. But that’s it. All the inherent performance and reliability issues you get with the factory diverter valve remain, because a spacer doesn’t change the diverter valve in any way. The VTA improves the operation of the diverter valve for sound AND performance.

 

Why choose a VTA over a kit that includes a solenoid?

Because there’s no performance benefit to replacing the factory solenoid, only a much higher price! If a VTA with the factory solenoid can open in a couple of hundredths of a second, why pay more than you need to?

Like the DV+, GFB’s VTA range of BOVs utilise GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as superior boost holding. However, where the DV+ and the VTA range differ is what they do with the vented air. VTA BOVs vent to atmosphere to make the signature turbo blow-off sound, where the DV+ recirculates the air to keep it quiet.

Each valve in the VTA range is designed specifically for the applications we list them for, ensuring the best fit and performance. Most of the VTA range are designed for use on cars with solenoid type factory diverter valves, and in those cases the VTA kit will retain the solenoid and ECU control. Like the DV+ though, it replaces the weak factory valve internals to ensure strength and reliability, especially in high boost applications.

Other versions of the VTA are designed for use on cars that do not have any kind of factory fitted diverter valve. Vehicle manufacturers have deleted the troublesome solenoid type diverter valve from some of the newer models, but this leads to turbo compressor surge which can be taxing on the turbo in the long run. The VTA valves for these cars are designed to re-introduce the function of a diverter/blow-off valve to help protect the turbo in the long term and provide a blow-off sound.

 

Vehicle Applications

VTA T9451 DV+ PERFORMANCE, BLOW OFF VALVE SOUND! also suits:

 

  • AUDI B7 (2005-2008) 2.0TFSI
  • AUDI 8P (2003-2013) 2.0TFSI
  • AUDI 8P (2003-2013) 2.0TFSI
  • AUDI S3 8P (2006-2013) 2.0TFSI
  • VW Golf GTI Mk5 2.0TFSI 04-09
  • VW Golf GTI Mk5 2.0TFSI 04-09
  • AUDI A6 2.0TFSI (2006-2011)
  • SKODA Octavia Mk2 1.4/1.8/2.0TFSI/TSI (Inc. VRS) 2005-2013
  • SKODA Octavia Mk2 1.4/1.8/2.0TFSI/TSI (Inc. VRS) 2005-2013
  • SKODA Octavia Mk2 1.4/1.8/2.0TFSI/TSI (Inc. VRS) 2005-2013
  • AUDI 8P (2003-2013) 2.0TFSI
  • VW Passat B6 2.0 TSI 05-11
  • VW Jetta Mk5 2.0T 2005-2010
  • AUDI TTRS 8J 2.5 TFSI 09-14 Note : Direct Fit
  • AUDI TT 8J 2.0 TFSI (EA888) 10-14 Note : Direct Fit
  • AUDI TTS 8J 2.0 TFSI 06-14 Note : Direct Fit
  • AUDI TT 8J 2.0 TFSI (EA113) 06-10 Note : Direct Fit
  • AUDI TT 8J 2.0 TFSI (EA888) 10-14
  • AUDI B8 (2007-2015) 1.8/2.0 TFSI
  • AUDI B8 (2007-2015) 1.8/2.0 TFSI
  • AUDI B8 (2007-2015) 1.8/2.0 TFSI
  • VW Tiguan 2.0 TFSI 07-11
  • VW Tiguan 2.0 TFSI 07-11
  • VW Tiguan 2.0 TSI 11-16
  • VW Tiguan 2.0 TSI 11-16
  • AUDI B8 (2007-2015) 1.8/2.0 TFSI
  • AUDI B8 (2007-2015) 1.8/2.0 TFSI
  • AUDI Q5 2.0TFSI (2008-2016, 8R)
  • VW Scirocco R Mk3 2.0t FSI (EA113) 06-13
  • VW Golf Mk6 1.4 TSI (Turbo Only, NOT Twincharged) 08-13
  • VW Golf R Mk6 2.0TSI 08-13
  • VW Golf GTI Mk6 2.0TSI 08-13
  • VW Jetta GLI Mk6 2.0T 2010-2013 (This Will Not Fit Facelifted Models With The EA888 Gen 3 Engine) Note : 100% Direct Bolt-On Installation For Your Selected Car, No Extra Adaptors Or Mods Required.
  • AUDI A6 2.0TFSI (2011-2018)
  • AUDI A1 2010-2014 1.4TFSI (90kW/122hp)
  • AUDI B9 (2015-2020) 2.0TFSI
  • AUDI B9 (2015-2020) 2.0TFSI
  • AUDI RS3 8V (2015-2017) *Does NOT suit RS3 8V FL*
  • VW EOS 2.0 TFSI 2006-2015
  • VW Scirocco Mk3 2.0t FSI
  • VW Scirocco Mk3 1.4 TSI (Turbo Only)
  • AUDI B9 (2016-On) 2.0 TFSI
  • AUDI B9 (2016-On) 2.0 TFSI

 

Manufacturer

Go Fast Bits (GFB)

 

Part Number

T9451 

OUR MODE.

MODE™ Strives to push the boundaries in automotive modification, styling and tuning by creating individualised vehicles that are truly one of a kind. These days cars have become a staple in our everyday lives. No matter what we drive, there is usually some or even many more of the exact same car out there. What we drive has become more and more a reflection of ourselves and our individuality. Seeing this we created a new concept in automotive modification in Australia.Each purchase made online can be delivered directly to your door or to one of our authorised MODE™ dealers for fitting & installation service plus in store advice, software tuning, coding and personalisation to your vehicle.MODE™ is the master distributor to some of the World’s largest and most exclusive automotive brands with an extensive dealer network to ensure that no matter where you are we can deliver that signature MODE™ experience, an experience you will never forget.

WHAT'S YOUR MODE?

MODE+ Rewards

 

MODE+ Rewards Loyalty Program is a points-based program through which our valued customers (like you!) can earn and redeem points.

Need help signing up? Click here. 

By joining the points programme, you agree to be bound by these terms and conditions. MODE Auto Concepts may, in its sole discretion, alter, limit, or modify regulations and benefits, without prior notice except as expressly set out in these terms.

 

 

Terms and Conditions

  1. Your points and rewards have no cash value and may not be exchanged for cash.

  2. Under the points programme, one point will be rewarded for every $1 AUD spent on eligible purchases of products on our website. The current redemption value of the reward points is 1 point = 1 cent.

  3. All Reward Points will expire 1 year from the date they were awarded to your account, following which such unused and expired reward points will be automatically deducted from the balance of your reward points at the relevant time and you will no longer be able to access or use them.

  4. If, after you have earned reward points on a product, you later require a refund, the reward points you earned in respect of the refunded product will be deducted from your account when the products have been received by us and your payment has been refunded.

  5. Reward points are for your personal use only and cannot be transferred, brought, sold or in any way traded.

  6. You can check your points and rewards on your online account. In case of any inconsistency between the membership points reflected in your account and our internal records, the latter shall prevail.

  7. To spend reward points on our website, you must log in to your customer account before selecting the products you wish to purchase. When you enter your payment details, select how many reward points you wish to redeem from the options available.

  8. If you have applied points towards an order, and you wish to partially cancel items off the order, the reward points will be partially refunded as well for your future orders.
For more information, please contact us at store@modeautoconcepts.com