AP Racing CP5548 - Pedal Box Assembly - Sliding Reversed Pull Type Family

$7,999.00 AUD

شامل الضريبةالشحن محسوبة عند السداد

AP Racing SKU: CP5548-CBT-TS

BIG INVENTORY
MODE is Australia's Largest Retailer & Wholesaler of Performance & Aesthetic Parts & accessories for European vehicles.

وصف ABOUT MODE. MODE+ Rewards

This unique, optimised, pull type sliding pedal box is AP Racing’s solution to comply with the safety regulation of a fixed driver’s seat in GT Racing, allowing for the accommodation of different height drivers in the same car.

The pull type design allows the load through the cylinders to remain straight during operation, which eliminates side loads that you see in a push type cylinder, making it the most efficient sliding pedal box on the market.
CP5548 is mounted in two, low friction linear bearing rails, which provide 187mm of adjustment, with 18 fixed positions at 11mm increments.
The cylinders are mounted under the driver’s feet for optimum space utilisation and access. Minimum hysteresis and balance variation are assured by the use of needle roller bearings in the centre trunnion.

CP5548-CBT incorporates a brake clutch and throttle pedal similar to CP5538-1 & CP5516-88 models. The Pull type design allows for the pushrod to remain straight, eliminating all side loads making it the most efficient pedal box on the market.

Features.

- Manufacture and construction - Modular BCT design with central Brake chassis and bolt on Clutch and Throttle to suit any configuration.

- Mounting - Central base plate under Brake chassis.

- Sliding Mechanism - Inboard concentrated under Brake pedal for optimum stiffness.

- Locking Mechanism - Rigid rail and double tapered pin with 11mm increments.

- Position Stops - Rigid front-stop and back-stop with incremental marking.

- Slide Release - Lighter springs to engage locking pins, bell-crank to reduce release load.

- Throttle Sensor - Provision for two throttle sensors, secure lock between throttle pedal and throttle shaft to eliminate backlash.

- Pedal Construction - Forged Pedals

- Throttle Pedal Control - Compression spring and separate adjustable compression damper.

- Brake pedal ratio - Adjustable bobbin ratio on pull rod secured with locking nut

- Other improvements - Positive robust Clutch & Throttle stops. Improved balance bar trunnion mounting. Adjustable brake pedal pad.

- Master Cylinders - Designed for use with CP6461, CP6465 OR CP6467 (ABS BRAKE APPLICATIONS).

- Approximate Weight - 7kg without cylinders.

- Brake pedal ratio adjustable - 4.10:1 TO 5.00:1

- Clutch pedal ratio- 4.55:1

- All threads are metric.

- Adjuster cable CP2905-18 included with assembly.

OUR MODE.

MODE™ Strives to push the boundaries in automotive modification, styling and tuning by creating individualised vehicles that are truly one of a kind. These days cars have become a staple in our everyday lives. No matter what we drive, there is usually some or even many more of the exact same car out there. What we drive has become more and more a reflection of ourselves and our individuality. Seeing this we created a new concept in automotive modification in Australia.Each purchase made online can be delivered directly to your door or to one of our authorised MODE™ dealers for fitting & installation service plus in store advice, software tuning, coding and personalisation to your vehicle.MODE™ is the master distributor to some of the World’s largest and most exclusive automotive brands with an extensive dealer network to ensure that no matter where you are we can deliver that signature MODE™ experience, an experience you will never forget.

WHAT'S YOUR MODE?

MODE+ Rewards

 

MODE+ Rewards Loyalty Program is a points-based program through which our valued customers (like you!) can earn and redeem points.

Need help signing up? Click here. 

By joining the points programme, you agree to be bound by these terms and conditions. MODE Auto Concepts may, in its sole discretion, alter, limit, or modify regulations and benefits, without prior notice except as expressly set out in these terms.

 

 

Terms and Conditions

  1. Your points and rewards have no cash value and may not be exchanged for cash.

  2. Under the points programme, one point will be rewarded for every $1 AUD spent on eligible purchases of products on our website. The current redemption value of the reward points is 1 point = 1 cent.

  3. All Reward Points will expire 1 year from the date they were awarded to your account, following which such unused and expired reward points will be automatically deducted from the balance of your reward points at the relevant time and you will no longer be able to access or use them.

  4. If, after you have earned reward points on a product, you later require a refund, the reward points you earned in respect of the refunded product will be deducted from your account when the products have been received by us and your payment has been refunded.

  5. Reward points are for your personal use only and cannot be transferred, brought, sold or in any way traded.

  6. You can check your points and rewards on your online account. In case of any inconsistency between the membership points reflected in your account and our internal records, the latter shall prevail.

  7. To spend reward points on our website, you must log in to your customer account before selecting the products you wish to purchase. When you enter your payment details, select how many reward points you wish to redeem from the options available.

  8. If you have applied points towards an order, and you wish to partially cancel items off the order, the reward points will be partially refunded as well for your future orders.
For more information, please contact us at store@modeautoconcepts.com

تقييمات العملاء

0 من أصل 5 استنادًا إلى 0 تقييمات تم الجمع بواسطة EasyReviews
 
0
 
0
 
0
 
0
 
0

اكتب تقييمًا