GFB Respons Diverter / Blow Off Valve with Sound Adjustment System for Audi VW Ford Mazda

$397.00 AUD

Taxes inclusesFrais d'expédition calculés lors du paiement

GFB (Go Fast Bits) SKU: T9025 Code à barre: 9328022000862

Disponible dès maintenant!

Typically in stock at our Sydney Warehouse.
This item is typically in stock at one of our locations and we will fulfill as soon as it's ready to dispatch!

BIG INVENTORY
MODE is Australia's Largest Retailer & Wholesaler of Performance & Aesthetic Parts & accessories for European vehicles.

RESPONS TMS : SMARTER THAN A DUAL PORT BLOW OFF VALVE


Atmosphere venting BOV won’t work on your car? Try a GFB Respons – you’ll be surprised!

Just another dual-port BOV?

On the surface, it may look like just another dual-port blow-off valve, but the Respons is actually much more than that. Featuring GFB’s venting bias adjustment system, the Respons allows you to precisely control how much air vents from each of the two outlets.

Why is this so important? There are two key reasons:

  1. Adjust how loud the blow-off sound is. Recirculate all of the air for silent factory operation, vent it all to atmosphere for maximum noise, or set it ANYWHERE in between to suit your preference.
  2. Get a blow-off sound WITHOUT causing stalling, backfiring, or any other BOV-related issues, even on a car with a sensitive airflow meter (MAF).

Hold on, it gets better. The Respons isn’t just a noise-maker. It also;

  • Offers better throttle response
  • Faster boost recovery on gearshift
  • Unlimited boost-holding!

For example, using GFB’s TMS (Turbo Management System) principle, tests show that the Respons can return the engine to peak boost up to 30% faster than a factory diverter valve when shifting gears (more information below)


How GFB’s venting bias adjustment works

Twisting the adjusting ring opens up the atmo port, whilst the recirc port is simultaneously closed.This results in possible venting ratios ranging from 100% recirc, right through to 100% atmosphere and anywhere in between.


Available in a huge range of universal and direct bolt-on kits

When we say “bolt-on”, that’s EXACTLY what we mean. Everything you need is included, it fits directly in the factory location (not on a separate adaptor), and no modifications to the car are required.

Performance AND sound without compromise!

  • Adjust the volume of your blow-off sound
  • Up to 30% faster boost recovery on gearshift
  • Get the blow off sound without the hassles - even on sensitive MAF-based systems
  • Hold unlimited boost pressure
  • Direct bolt-on kits available

Get the inside information...

GFB is no stranger to dual port BOVs. In fact, GFB pioneered the design in 1999, following up with the venting bias adjustment system in 2001.

This technology is not just a gimmick – it’s the key to getting a blow-off sound without the issues (unlike other valves), and is exclusive to GFB.

“I thought venting to atmosphere couldn’t be done on a car with an airflow meter, so how does the Respons do it?”

We’ve all heard the stories and seen people get shot down on forums when they ask about BOVs. Common responses are “your car will stall,backfire, run rich, go slower, or rip a hole in the space-time continuum that will bring about the end of the universe”. Certainly, if the BOV is not designed or adjusted correctly, at least some of these may be true.

When you vent a BOV to atmosphere, you’re letting air out of the system that has been measured by the airflow meter, so the ECU will continue to inject fuel for that missing air, hence the issues with over-fuelling that can occur.

However, by controlling HOW MUCH the valve vents, WHEN it vents, and for HOW LONG, the Respons can be configured to vent a portion of air to atmosphere at a time and of a volume that least affects the fuelling to the point where there are no negative side-effects.

Since our competitors do not have a means for adjusting the amount of air that is vented to atmosphere, they are unable to achieve the same success that a Respons does on even the most sensitive engines.


If everything you’ve heard tells you a BOV won’t work on your car, try a GFB Respons - you will be surprised!

“How does a GFB Respons improve performance?”

Boost holding

Unlike factory bypass valves, or other brand valves that require different springs for different boost levels, a GFB valve CANNOT be forced open by high boost!

The balanced piston design in a GFB valve uses boost pressure on either side to cancel out the forces. Therefore it doesn’t matter how much boost you run, you can be sure a Respons valve will deliver all of it to the engine.

Throttle response and boost recovery

GFB’s TMS (Turbo Management System) principle is based on an operating method that is different to all factory bypass valves, which can be summarised as:

A factory bypass valve is open until required to shut.

A GFB TMS valve is shut until required to open.

This difference in operating methods means that the GFB valve only vents when required, and only enough air to prevent compressor surge.

For example, during a gearshift it is possible to preserve a small amount of boost pressure for a short duration. Then, when the throttle is then re-opened, peak boost is reached faster than if all pressure is lost (as is the case with the factory valve that remains fully open too long).

COMPATABILITY

Respons T9025 Diverter / Blow Off Valve with Sound Adjustment System for Audi, VW, Ford, Mazda Applications also suits:

AUDI 8L (1996-2003) 1.8t Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
AUDI B5 (1995-2001) 1.8t Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
AUDI B5 (1995-2001) 1.8t Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
AUDI B6 (2001-2005) 1.8t Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
AUDI B6 (2001-2005) 1.8t Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
AUDI S3 8L (1999-2003) 1.8t Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
AUDI S3 8L (1999-2003) 1.8t Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
AUDI TT 8N 1.8t 98-06 Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
AUDI TT 8N 1.8t 98-06 Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
AUDI TT 8N 1.8t 98-06 Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
AUDI TT 8N 1.8t 98-06 Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
FORD AUSTRALIA Territory SY 4.0L turbo 06-11 Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
FORD AUSTRALIA XR6 BA-BF 4.0L turbo 02-08
FORD AUSTRALIA XR6 BA-BF 4.0L turbo 02-08
FORD AUSTRALIA XR6 FG 4.0L turbo 08-on
MAZDA SP Turbo 2002 (150kW/200hp)VW Golf GTI Mk4 1.8t 97-05 Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
VW New Beetle 1st Generation 1.8t 99-on Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
VW Passat B5-B5.5 1.8t 96-05 Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
VW Polo GTI Mk4F (Typ 9N3) 1.8t 05-09 Note : When installing a GFB valve, it must be installed in the OPPOSITE orientation to the factory plastic Bosch valve - i.e. air must enter the GFB valve at the bottom, and dump through the sides.
AUDI B5 (1995-2001) 1.8t
AUDI B5 (1995-2001) 1.8t
VW Bora MK4 1.8t 00-05
AUDI TT 8N 1.8t 98-06
AUDI S4 B5 (Typ 8D) 2.7 Biturbo 97-01 (two valves required)
SAAB 9-3 Turbo 98-02
SAAB 9-3 Turbo 98-02
SAAB 9-3 Turbo 98-02
SAAB 9-3 Turbo 98-02
SAAB 9-3 Turbo 98-02
SAAB 9-3 Turbo 98-02
SAAB 9-5 Turbo 98-09
SAAB 9-5 Turbo 98-09
SAAB 9-5 Turbo 98-09
SAAB 9-5 Turbo 98-09
SAAB 9-5 Turbo 98-09
SAAB 9-5 Turbo 98-09
SAAB 9-5 Turbo 98-09

OUR MODE.

MODE™ Strives to push the boundaries in automotive modification, styling and tuning by creating individualised vehicles that are truly one of a kind. These days cars have become a staple in our everyday lives. No matter what we drive, there is usually some or even many more of the exact same car out there. What we drive has become more and more a reflection of ourselves and our individuality. Seeing this we created a new concept in automotive modification in Australia.Each purchase made online can be delivered directly to your door or to one of our authorised MODE™ dealers for fitting & installation service plus in store advice, software tuning, coding and personalisation to your vehicle.MODE™ is the master distributor to some of the World’s largest and most exclusive automotive brands with an extensive dealer network to ensure that no matter where you are we can deliver that signature MODE™ experience, an experience you will never forget.

WHAT'S YOUR MODE?

Le programme de fidélité MODE+ Rewards est un programme basé sur des points grâce auquel nos précieux clients (comme vous !) peuvent gagner et échanger des points.

Besoin d'aide pour vous inscrire? Cliquez sur ici .

En rejoignant le programme de points, vous acceptez d'être lié par ces termes et conditions. MODE Auto Concepts peut, à sa seule discrétion, altérer, limiter ou modifier les règlements et les avantages, sans préavis, sauf indication expresse dans les présentes conditions.

Termes et conditions

  1. Vos points et récompenses n'ont aucune valeur monétaire et ne peuvent être échangés contre de l'argent.

  2. Dans le cadre du programme de points, un point sera récompensé pour chaque 1 $ AUD dépensé pour des achats éligibles de produits sur notre site Web. La valeur d'échange actuelle des points de récompense est de 1 point = 1 centime.

  3. Tous les points de récompense expireront 1 an à compter de la date à laquelle ils ont été attribués à votre compte, après quoi ces points de récompense inutilisés et expirés seront automatiquement déduits du solde de vos points de récompense au moment pertinent et vous ne pourrez plus accéder ou Utilise les.

  4. Si, après avoir gagné des points de récompense sur un produit, vous demandez ultérieurement un remboursement, les points de récompense que vous avez gagnés pour le produit remboursé seront déduits de votre compte lorsque nous aurons reçu les produits et que votre paiement aura été remboursé.

  5. Les points de récompense sont destinés à votre usage personnel uniquement et ne peuvent être transférés, apportés, vendus ou échangés de quelque manière que ce soit.

  6. Vous pouvez consulter vos points et récompenses sur votre compte en ligne. En cas d'incohérence entre les points d'adhésion reflétés dans votre compte et nos enregistrements internes, ces derniers prévaudront.

  7. Pour dépenser des points de fidélité sur notre site, vous devez vous connecter à votre compte client avant de sélectionner les produits que vous souhaitez acheter. Lorsque vous entrez vos informations de paiement, sélectionnez le nombre de points de récompense que vous souhaitez échanger parmi les options disponibles.

  8. Si vous avez appliqué des points à une commande et que vous souhaitez annuler partiellement des articles de la commande, les points de récompense seront également partiellement remboursés pour vos futures commandes.
Pour plus d'informations, veuillez nous contacter au magasin @modeautoconcepts.com