MODE x BMS Ultimate Water Injection Kit WMI w/ Stealth Tank for BMW M3 F80 M4 F82 M2 Competition F87 S55

$1,700.49 AUD $2,112.08 AUD Save $411.59 AUD

Tax includedShipping calculated at checkout

Assembled by MODE™️ Part No. WMI-KIT-OEM-S55

3+ in Stock at MODE Locations!

BIG INVENTORY
MODE is Australia's Largest Retailer & Wholesaler of Performance & Aesthetic Parts & accessories for European vehicles.

Description ABOUT MODE. MODE+ Rewards

MODE x BMS Ultimate Water Injection Kit WMI w/ Stealth Tank suits BMW M3 F80 M4 F82 M2 Competition F87 S55

WHAT IS A METHANOL INJECTION?

Water/Methanol/Alcohol injection commonly referred to as WMI is a system that allows Water, Methanol or Alcohol to be injected into the pre-throttle system to allow for higher octane and cooler intake temps while still running pump fuel such as 98 RON. WMI can also be added with flex fuel systems and E85 build for further cooling and octane benefits.

WHY DO I NEED IT?

WMI will allow an engine to make greater amounts of power on pump gas such as 98 RON. The effect is similar to running 100 octane race gas or E85 fuel all the time with the additional cooling benefits allowing for more power than you can make on race gas or E85 alone.

MODE x bootmod3 Compatible.

The key to a safe and effective WMI setup is tuning integration. The MODE x BMS WMI kit is the only system available that will easily integrates with the MODE x bootmod3 ultimate tuning bundle without any additional controllers being required to operate the WMI system.

The MODE x BMS Ultimate WMI kit includes a high quality Aquatec WMI pump made to our specifications, high speed solenoid with leak-free compression fittings, a WMI filter, and all required wiring and mounting hardware and an F-chassis specific stealth tank for a fully hidden/clean install.

MODE x BMS Ultimate Water Injection Kit Includes:

  • Aquatec 220psi WMI Water Meth Injection Pump

  • Burger Motorsports Tee Fitting
  • Burger Motortsport Dual Nozzle Holders
  • Burger Motorsports Dual BM5 WMI Nozzles (Stock Turbos)
  • Burger Motorsports Dual BM7 WMI Nozzles (Upgraded Turbos)

  • Burger Motorsports BMW WMI Stealth Tank (Suit BMW M3 F80 / M4 F82)

  • Burger Motorsports WMI Solenoid
  • Methanol Injection Line 1/4"  (9 Metres / 30 feet)
  • Devilsown Methanol Injection Check Valve 1/4" Tube (Part no. 3031)
  • Devilsown Methanol Injection Filter 1/4" Tube (Part no. 2218)

  • AEM V2 Standard WMI Controller Kit (Part no. 30-3304)

  • Macht Schnell Boost Metering Block (Part no. 10.25.100)

  • Fitting & Wiring Kit (Straight and 90 degree Injector fittings for different installation setups for chargepipe or boost pipe injection)

 

INSTALLATION:

Installation of any WMI solution is extensive and must be carried out by highly qualified technicians only.

WARNING: Improper installation may cause irreversible engine damage.

Please Click Here to locate a dealer in your area.

INSTALLATION TIPS:

  1. This is a great time to upgrade your charge pipes as they will be required for the meth injection nozzles to be installed.

APPLICATIONS:

  • BMW M3 F80 (2014-2018)

  • BMW M3 F80 Competition (2016-2018)

  • BMW M4 F82/F83 (2014-2020)

  • BMW M4 F82/F83 Competition (2016-2020)

  • BMW M4 GTS (2016)
  • BMW M2 CS (2020)

  • BMW M2 Competition F87 (2018-2020)

 

    ATTENTION: MODE Auto Concepts assume no liability on the use or improper installation of this product. Product is for off-road / racing use only.

     

    What's inside water injection nozzles?

    BMW Methanol Injection Nozzles by Burger Motorsports for JB4 integration


     

    BMS 3 gal. STEALTH TANK

    BMS stealth tank
    With our 3 gallon stealth tank the WMI pump mounts directly to the tank and the entire assembly fits cleanly within the existing trunk cavity in your F3X or F8X vehicle below the trunk floor. Works with all DDP 5800 pumps. Made in USA.

    Comes with standard 2 way vented black plastic cap.
    Upgraded billet lid with 1-way check valve available below.

    Tank dimensions: L 26.75" x W 9.75" X H 7.5"

    Applications
    • 2015+ F80 M3
    • 2015+ F82 M4 (does not fit convertible)

     

     

     

     

     

    CAP UPGRADE

    Optional Upgraded Billet WMI tank cap w/safety check valve

    This high quality custom billet WMI cap includes an integrated check valve to let air in and prevent dangerous WMI vapor/fumes from getting out! Made in USA.

    Applications
    • BMS 1 gallon tank
    • BMS 2 gallon universal tank
    • BMS 2 & 3 gallon stealth tank

    INSTALL GUIDE

    Download Install Guide

    OUR MODE.

    MODE™ Strives to push the boundaries in automotive modification, styling and tuning by creating individualised vehicles that are truly one of a kind. These days cars have become a staple in our everyday lives. No matter what we drive, there is usually some or even many more of the exact same car out there. What we drive has become more and more a reflection of ourselves and our individuality. Seeing this we created a new concept in automotive modification in Australia.Each purchase made online can be delivered directly to your door or to one of our authorised MODE™ dealers for fitting & installation service plus in store advice, software tuning, coding and personalisation to your vehicle.MODE™ is the master distributor to some of the World’s largest and most exclusive automotive brands with an extensive dealer network to ensure that no matter where you are we can deliver that signature MODE™ experience, an experience you will never forget.

    WHAT'S YOUR MODE?

    MODE+ Rewards

     

    MODE+ Rewards Loyalty Program is a points-based program through which our valued customers (like you!) can earn and redeem points.

    Need help signing up? Click here. 

    By joining the points programme, you agree to be bound by these terms and conditions. MODE Auto Concepts may, in its sole discretion, alter, limit, or modify regulations and benefits, without prior notice except as expressly set out in these terms.

     

     

    Terms and Conditions

    1. Your points and rewards have no cash value and may not be exchanged for cash.

    2. Under the points programme, one point will be rewarded for every $1 AUD spent on eligible purchases of products on our website. The current redemption value of the reward points is 1 point = 1 cent.

    3. All Reward Points will expire 1 year from the date they were awarded to your account, following which such unused and expired reward points will be automatically deducted from the balance of your reward points at the relevant time and you will no longer be able to access or use them.

    4. If, after you have earned reward points on a product, you later require a refund, the reward points you earned in respect of the refunded product will be deducted from your account when the products have been received by us and your payment has been refunded.

    5. Reward points are for your personal use only and cannot be transferred, brought, sold or in any way traded.

    6. You can check your points and rewards on your online account. In case of any inconsistency between the membership points reflected in your account and our internal records, the latter shall prevail.

    7. To spend reward points on our website, you must log in to your customer account before selecting the products you wish to purchase. When you enter your payment details, select how many reward points you wish to redeem from the options available.

    8. If you have applied points towards an order, and you wish to partially cancel items off the order, the reward points will be partially refunded as well for your future orders.
    For more information, please contact us at store@modeautoconcepts.com