GFB DV+ Diverter for BMW N55 135i E82 M135i F20 M235i F22 335i E90 E92 F30 435i F32

$172.00 AUD

Tax includedShipping calculated at checkout

GFB (Go Fast Bits) Part No. T9356 Barcode: 9328022000640

3+ in Stock at MODE Locations!

BIG INVENTORY
MODE is Australia's Largest Retailer & Wholesaler of Performance & Aesthetic Parts & accessories for European vehicles.

Description ABOUT MODE. MODE+ Rewards

NOTE: This item does NOT suit BMW M2 F87 N55

Description

Worldwide Patent and Design Patent Pending

  • Retains the factory solenoid coil for seamless integration
  • Replaces plastic valve parts with metal for reliability and strength on chipped engines
  • Direct-fit replacement with GFB’s TMS benefits
  • Exclusive “pilot-actuated” valve mechanism for rapid response at high boost

GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles.

The solenoid coil itself from the factory-fitted valve is great (the ECU opens it faster than any pneumatic valve so why replace it?), but the weak point however is the valve mechanism itself. So GFB’s DV+ solves this problem by replacing just the valve parts with an anodised billet aluminium housing fitted with a brass piston machined to exacting tolerances.

The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Read all about the DV+ story on the next page.

feature-2

Other manufacturers’ products involve replacing the entire system with a traditional pneumatic valve, requiring long vacuum hose runs, additional parts for tapping into the intake manifold vacuum, plus either a different solenoid valve to actuate the pneumatic valve or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install.

GFB’s DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn’t cause compressor surge/turbo flutter. Oh, and it doesn’t require different springs or frequent re-builds.

 

Features

Exploded view labels snagit

Many late-model European cars use ECU controlled solenoid-type diverter valves. This is a good concept because the valve can react very quickly and it only opens when it needs to.

However, there are some problems with these valves. There are typically two types of solenoid-actuated diverter valves found standard on VAG and European cars, both of which have their shortcomings.

feature-4

Common OE Problem #1
The diaphragm types are commonly known to rupture, especially when boost and temperature are increased as a result of chip tuning.

feature-5

Common OE Problem #2
The plastic piston-type leaks far more than most people realise (by design, not from wear), and doesn’t always close after a high-boost gear shift.

Additionally, in both cases, the solenoid on the OE diverter is directly connected to the valve mechanism, which is not ideal because neither it nor the return spring are strong enough to open and close the valve reliably at high boost.

With problems like this, you can see why other aftermarket manufacturers assume the best solution is to replace the factory diverter entirely. Unfortunately though, whilst their replacement kits might be stronger than the factory diverter, their slower response speed and lower flow do not justify the extra cost and complexity - more of a compromise than a solution.

GFB has taken a different approach to deliver a complete solution that solves existing problems and improves performance, without compromise or a hefty price tag.

The DV+ addresses the factory valve problems with a very simple and elegant solution. Keeping the factory solenoid retains all the benefits of the stock system, and replacing the valve parts with indestructable metal components ensures strength and reliability no matter how much boost you run.

That's not all. Rather than using the solenoid to directly actuate the valve, we’ve introduced a unique “pilot-actuation” system. This means the solenoid controls the air pressure that is used to open and close the piston, so it doesn't matter how much boost you push through it, the DV+ will open and close reliably without ever exceeding the solenoid’s capability.

This feature also improves on the factory system by opening the valve progressively in response to boost pressure, so it only opens as much as required to get the job done (the factory valve simply opens and shuts, it cannot partially open if boost pressure is low), resulting in better throttle response.

feature-6

 

Compatibility

BMW

  • 1 SERIES E82 135i 306hp Coupe RWD - 2007 to 2013
  • 1 SERIES E88 135i 306hp Convertible RWD - 2007 to 2013
  • 1 SERIES F20 F21 114i 102hp Hatchback RWD - 2011 and later
  • 1 SERIES F20 F21 116i 136hp Hatchback RWD - 2010 and later
  • 1 SERIES F20 F21 118i 170hp Hatchback RWD - 2010 and later
  • 1 SERIES F20 F21 M135i 320hp Hatchback RWD - 2011 and later
  • 1 SERIES F20 F21 M135ix 320hp Hatchback AWD - 2011 and later
  • 2 SERIES F22 M235i 326hp Coupe RWD - 2013 and later
  • 2 SERIES F22 M235ix 326hp Coupe AWD - 2013 and later
  • 3 SERIES E90 E92 E93 335i 306hp RWD  - 2006 to 2013
  • 3 SERIES E90 E92 E93 335ix 306hp AWD  - 2006 to 2013
  • 3 SERIES F30 335i 306hp Saloon RWD - 2011 and later
  • 3 SERIES F30 335ix 306hp Saloon AWD - 2011 and later
  • 3 SERIES F30 316i 136hp Saloon RWD - 2012 and later
  • 3 SERIES F30 F35 320i 170hp Saloon RWD - 2012 and later
  • 3 SERIES F30 F35 320ix 170hp Saloon AWD - 2012 and later
  • 3 SERIES F31 316i 136hp Estate RWD - 2013 and later
  • 4 SERIES F32 435i 306hp coupe RWD - 2013 and later
  • 4 SERIES F32 435ix 306hp coupe AWD - 2013 and later
  • 5 SERIES F10 535i 306hp saloon RWD - 2009 to 2017
  • 5 SERIES F10 535ix 306hp saloon AWD - 2009 to 2017
  • 5 SERIES F10 ActiveHybrid 306hp saloon RWD - 2011 to 2017
  • 5 SERIES F10 ActiveHybrid 340hp saloon RWD - 2011 to 2017
  • 5 SERIES F11 535i  306hp Estate RWD - 2010 to 2017
  • 5 SERIES F11 535ix  306hp Estate AWD - 2010 to 2017
  • 5 SERIES GRAN TURISMO F07 535i 306hp Hatchback RWD - 2009 and later
  • 5 SERIES GRAN TURISMO F07 535ix 306hp Hatchback AWD - 2009 and later
  • 6 GRAN COUPÉ F06 640i 320hp Coupe RWD - 2011 and later
  • 6 GRAN COUPÉ F06 640ix 320hp Coupe AWD - 2011 and later
    • 6 SERIES F12 640i 320hp Convertible RWD - 2011 and later
    • 6 SERIES F13 640ix 320hp Coupe AWD - 2010 and later
    • 7 SERIES F01 F02 F03 F04 740i/740Li 320hp Saloon RWD - 2012 to 2015
    • F25 X3 35i xDrive 306hp SUV All-wheel Drive - 2010 and later
    • E70 X5 35i xDrive 306hp SUV All-wheel Drive - 2010 to 2013
    • F15 X5 35i xDrive 306hp SUV All-wheel Drive - 2013 and later
    • E71 E72 X6 35i xDrive 306hp SUV All-wheel Drive - 2008 to 2014

     

    FIAT

    • 500 1.4 135hp Hatchback FWD - 2008 to 2018
    • 500 1.4 140hp Hatchback FWD - 2010 and later
    • 500 1.4 160hp Hatchback FWD - 2008 and later
    • 500 1.4 180hp Hatchback FWD - 2008 and later
    • 500C/595C 1.4 145hp Convertible FWD - 2016 and later
    • 500C/595C 1.4 160hp Convertible FWD - 2011 to 2017
    • 500C/595C 1.4 165hp Convertible FWD - 2016 and later

     

    ABARTH

    • 500/595/695 312 1.4 135hp Hatchback FWD - 2008 and later
    • 500/595/695 312 1.4 160hp Hatchback FWD - 2008 and later
    • 500/595/695 312 1.4 180hp Hatchback FWD - 2008 and later
    • 199 1.4 155hp Hatchback FWD - 2007 to 2010
    • 199 1.4 163hp Hatchback FWD - 2009 and later
    • 199 1.4 180hp Hatchback FWD - 2007 to 2012
    • 199 1.4 180hp Hatchback FWD - 2008 and later

     

    ALFA ROMEO

    • Guilietta 940 1.4 TB 120hp Hatchback FWD 2010 and later
    • Guilietta 940 1.4 TB 170hp Hatchback FWD 2010 and later

     

    Compatibility Check

    To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number(UK) or the last 7 digits of your VIN. Simply enter your car details prior to checkout. 

     

    Installation

    Go Fast Bits BMW N55 Diverter Valve Upgrade (135i, M135i, M235i, 335i & 435i) - Install Guide - ML Performance UK

     

    Part Number

    T9356 

     

    More Information

    Manufactured by

    Go Fast Bits

     

    Warranty

    1 year warranty.

    OUR MODE.

    MODE™ Strives to push the boundaries in automotive modification, styling and tuning by creating individualised vehicles that are truly one of a kind. These days cars have become a staple in our everyday lives. No matter what we drive, there is usually some or even many more of the exact same car out there. What we drive has become more and more a reflection of ourselves and our individuality. Seeing this we created a new concept in automotive modification in Australia.Each purchase made online can be delivered directly to your door or to one of our authorised MODE™ dealers for fitting & installation service plus in store advice, software tuning, coding and personalisation to your vehicle.MODE™ is the master distributor to some of the World’s largest and most exclusive automotive brands with an extensive dealer network to ensure that no matter where you are we can deliver that signature MODE™ experience, an experience you will never forget.

    WHAT'S YOUR MODE?

    MODE+ Rewards

     

    MODE+ Rewards Loyalty Program is a points-based program through which our valued customers (like you!) can earn and redeem points.

    Need help signing up? Click here. 

    By joining the points programme, you agree to be bound by these terms and conditions. MODE Auto Concepts may, in its sole discretion, alter, limit, or modify regulations and benefits, without prior notice except as expressly set out in these terms.

     

     

    Terms and Conditions

    1. Your points and rewards have no cash value and may not be exchanged for cash.

    2. Under the points programme, one point will be rewarded for every $1 AUD spent on eligible purchases of products on our website. The current redemption value of the reward points is 1 point = 1 cent.

    3. All Reward Points will expire 1 year from the date they were awarded to your account, following which such unused and expired reward points will be automatically deducted from the balance of your reward points at the relevant time and you will no longer be able to access or use them.

    4. If, after you have earned reward points on a product, you later require a refund, the reward points you earned in respect of the refunded product will be deducted from your account when the products have been received by us and your payment has been refunded.

    5. Reward points are for your personal use only and cannot be transferred, brought, sold or in any way traded.

    6. You can check your points and rewards on your online account. In case of any inconsistency between the membership points reflected in your account and our internal records, the latter shall prevail.

    7. To spend reward points on our website, you must log in to your customer account before selecting the products you wish to purchase. When you enter your payment details, select how many reward points you wish to redeem from the options available.

    8. If you have applied points towards an order, and you wish to partially cancel items off the order, the reward points will be partially refunded as well for your future orders.
    For more information, please contact us at store@modeautoconcepts.com