Eventuri BMW Carbon Performance Intake F06 F12 F13 M6

$4,578.99 AUD

Tax includedShipping calculated at checkout

Eventuri Part No. EVE-F1XM6-INT

3+ in Stock at MODE Locations!

BIG INVENTORY
MODE is Australia's Largest Retailer & Wholesaler of Performance & Aesthetic Parts & accessories for European vehicles.

BMW F06 F12 F13 M6

Description

The F12/F13/F06 M6 intake system was developed through extensive dyno testing, maximum velocity tests and flow optimisation. We have developed a complete system from front air scoops to filter housings and even inlet tubes to the turbos. The resulting system is very efficient and reduces the resistance to the turbos by giving a smooth path for the airflow to travel through.

The Eventuri Difference

The F12/F13/F06 M6 Eventuri system uses our Patent Pending Carbon fibre Housing which provides an aerodynamically efficient airflow path from the filter to the MAF tube. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect.

The Eventuri FXX M6 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. Here are the details for each component and the design ethos behind them:

Each intake system consists of:

  • 2 Carbon Fibre Venturi housings
  • 2 High Flow Double Cone Air Filters
  • 2 Aluminium Cowls for smooth airflow entry
  • Left Side Carbon Tube with integrated MAF sensor mount
  • Right Side Carbon Tube with integrated MAF sensor mount
  • 2 Carbon Fibre Front Scoops
  • 2 Carbon Fibre Front Scoop Extensions
  • 2 Laser Cut Aluminium Shields with integrated flow deflectors
  • High quality Silicon couplers with BMW specification hose clamps



Carbon Intake Housing Assemblies

    Eventuri BMW Carbon Performance Intake F06 F12 F13 M6 - ML Performance

    The filter housings comprise of the high flow filters, aluminium cowls and the carbon pods themselves. The carbon pods shroud the reverse mounted filter and smoothly shape the airflow down to the intake tubes. This smooth reduction in cross-sectional area invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack - below is a diagram to show the comparison between our patent pending design and a regular intake system. You can read more about the Eventuri Filter housing design.

    Eventuri BMW Carbon Performance Intake F06 F12 F13 M6 - ML Performance

    Carbon Fibre Intake Tubes

    Eventuri BMW Carbon Performance Intake F06 F12 F13 M6 - ML Performance

    Our intake tubes are again crafted from 100% prepreg carbon fibre. Each tube has an integrated MAF sensor mount which is CNC machined from aluminium. The tubes smoothly connect the filter housings to the turbo inlets and eliminate the stock corrugated flexi-tubes which have a much more disruptive flow path. We ensured that the carbon tubes maintain a true circular cross section - even at the MAF boss for the best possible flow characteristics.

    Carbon Fibre Air Scoops

    Eventuri BMW Carbon Performance Intake F06 F12 F13 M6 - ML Performance Eventuri BMW Carbon Performance Intake F06 F12 F13 M6 - ML Performance

    The final carbon components in this system are the front scoops - essential to direct ambient air to the filters.

    The scoops were designed for maximum efficiency in directing the incoming air to the stock duct openings. Many aftermarket scoops have a large flat area almost perpendicular to the oncoming air - not great for channelling it into the ducts as the airflow just "hits" this flat portion and creates turbulence. For the M6 variant, in particular, we also added 2 carbon fibre scoop extensions to connect the scoops to the front grills. This gives the incoming airflow a continuous path through the scoops into the stock ducts.

    Unlike most aftermarket "scoops" the Eventuri Scoops have been designed extend from the stock duct openings all the way to the grills. In order to capture as much air as possible, the scoops are shaped to the same contours as the outsides of the grills and then smoothly channel ambient air through a continuous curve to the duct openings. CAD images to illustrate the shape:

    Eventuri BMW Carbon Performance Intake F06 F12 F13 M6 - ML Performance

    Having an effective cold air feed to the filters is an essential part of our design. Simply having some heat shields in place is not an effective means of avoiding heated air from entering the filters unless the shields create an air tight envelope around the filters. The scoops and shields in our system combine to provide the filter openings with ambient air and maintain low intake air temperature. To illustrate the effectiveness of this system, we put together this video showing our intake design on the F83 M4 which has the same scoop/duct design:

    The scoops are simple to install - they snap onto the existing strut brace and are then held in position by the front grills.

    Shields / Flow Deflectors

    Eventuri BMW Carbon Performance Intake F06 F12 F13 M6 - ML Performance The filter housings are positioned with the openings nestled inside the flow deflectors. These deflectors capture the cold air coming in from the front scoops and help displace hot air from around the filter openings. Here is a CAD image to illustrate the configuration of the filter housings, deflectors and scoops. The path between the scoops and deflectors is taken up by the stock ducts.

    To illustrate - here are the left and right-hand side intakes assembled as they would be in the engine bay with the tubes and ducts:

    Eventuri BMW Carbon Performance Intake F06 F12 F13 M6 - ML Performance

    Eventuri BMW Carbon Performance Intake F06 F12 F13 M6 - ML Performance

    Eventuri BMW Carbon Performance Intake F06 F12 F13 M6 - ML Performance

    Eventuri BMW Carbon Performance Intake F06 F12 F13 M6 - ML Performance

    Eventuri BMW Carbon Performance Intake F06 F12 F13 M6 - ML Performance

    Eventuri BMW Carbon Performance Intake F06 F12 F13 M6 - ML Performance

    Eventuri BMW Carbon Performance Intake F06 F12 F13 M6 - ML Performance

    Compatibility Check

    To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number (AUS) or the last 7 digits of your VIN. Simply enter your car details prior to checkout.

    Compatibility

    BMW M Series - F13 M6

    Warranty

    One Year Eventuri Warranty

    Manufactured by

    Eventuri

    Part Number

    EVE-F1XM6-INT (All Black Carbon)

    EVE-F1XM6-KV-INT (Kevlar Intake with Black Tubes)

    Eventuri BMW Carbon Performance Intake System F10 M5 Installtion Guide - ML Performance UK

    OUR MODE.

    MODE™ Strives to push the boundaries in automotive modification, styling and tuning by creating individualised vehicles that are truly one of a kind. These days cars have become a staple in our everyday lives. No matter what we drive, there is usually some or even many more of the exact same car out there. What we drive has become more and more a reflection of ourselves and our individuality. Seeing this we created a new concept in automotive modification in Australia.Each purchase made online can be delivered directly to your door or to one of our authorised MODE™ dealers for fitting & installation service plus in store advice, software tuning, coding and personalisation to your vehicle.MODE™ is the master distributor to some of the World’s largest and most exclusive automotive brands with an extensive dealer network to ensure that no matter where you are we can deliver that signature MODE™ experience, an experience you will never forget.

    WHAT'S YOUR MODE?

    MODE+ Rewards

     

    MODE+ Rewards Loyalty Program is a points-based program through which our valued customers (like you!) can earn and redeem points.

    Need help signing up? Click here

    By joining the points programme, you agree to be bound by these terms and conditions. MODE Auto Concepts may, in its sole discretion, alter, limit, or modify regulations and benefits, without prior notice except as expressly set out in these terms.

     

     

    Terms and Conditions

    1. Your points and rewards have no cash value and may not be exchanged for cash.

    2. Under the points programme, one point will be rewarded for every $1 AUD spent on eligible purchases of products on our website. The current redemption value of the reward points is 1 point = 1 cent.

    3. All Reward Points will expire 1 year from the date they were awarded to your account, following which such unused and expired reward points will be automatically deducted from the balance of your reward points at the relevant time and you will no longer be able to access or use them.

    4. If, after you have earned reward points on a product, you later require a refund, the reward points you earned in respect of the refunded product will be deducted from your account when the products have been received by us and your payment has been refunded.

    5. Reward points are for your personal use only and cannot be transferred, brought, sold or in any way traded.

    6. You can check your points and rewards on your online account. In case of any inconsistency between the membership points reflected in your account and our internal records, the latter shall prevail.

    7. To spend reward points on our website, you must log in to your customer account before selecting the products you wish to purchase. When you enter your payment details, select how many reward points you wish to redeem from the options available.

    8. If you have applied points towards an order, and you wish to partially cancel items off the order, the reward points will be partially refunded as well for your future orders.
    For more information, please contact us at store@modeautoconcepts.com