MODE x BMS Ultimate Water Injection Kit WMI w/ Stealth Tank suits BMW N20 N54 N55 B48 B58 S55 S63 TU
WHAT IS WMI / WATER METHANOL INJECTION?
Water/Methanol/Alcohol injection commonly referred to as WMI is a system that allows Water, Methanol or Alcohol to be injected into the pre-throttle system to allow for higher octane and cooler intake temps while still running pump fuel such as 98 RON. WMI can also be added with flex fuel systems and E85 build for further cooling and octane benefits.
WHY DO I NEED IT?
WMI will allow an engine to make greater amounts of power on pump gas such as 98 RON. The effect is similar to running 100 octane race gas or E85 fuel all the time with the additional cooling benefits allowing for more power than you can make on race gas or E85 alone.
MODE x bootmod3 Compatible.
The key to a safe and effective WMI setup is tuning integration. The MODE x BMS WMI kit is the only system available that will easily integrates with the MODE x bootmod3 ultimate tuning bundle without any additional controllers being required to operate the WMI system.
The MODE x BMS Ultimate WMI kit includes a high quality Aquatec WMI pump made to our specifications, high speed solenoid with leak-free compression fittings, a WMI filter, and all required wiring and mounting hardware including a 2 Gallon tank with pump mount.
MODE x BMS Ultimate Water Injection Kit Includes:
-
Aquatec 220psi WMI Water Meth Injection Pump
- Burger Motorsports BM5, BM7, BM10, BM12 WMI Nozzles (Select)
-
Burger Motorsports 2 Gallon WMI Tank
- Burger Motorsports WMI Solenoid
- Methanol Injection Line 1/4" (9 Metres / 30 feet)
- Devilsown Methanol Injection Check Valve 1/4" Tube (Part no. 3031)
- Devilsown Methanol Injection Filter 1/4" Tube (Part no. 2218)
-
AEM V2 Standard WMI Controller Kit (Part no. 30-3304)
-
Macht Schnell Boost Metering Block (Part no. 10.25.100)
- Fitting & Wiring Kit (Straight and 90 degree Injector fittings for different installation setups for chargepipe or boost pipe injection)
INSTALLATION:
Installation of any WMI solution is extensive and must be carried out by highly qualified technicians only.
WARNING: Improper installation may cause irreversible engine damage.
Please Click Here to locate a dealer in your area.
INSTALLATION TIPS:
- This is a great time to upgrade your charge pipes as they will be required for the meth injection nozzles to be installed.
APPLICATIONS:
-
BMW N20/N26 F-Series
-
BMW N54 & N55 E-Series
-
BMW N55 F-Series
-
BMW B48 F-Series & G-Series
-
BMW B58 F-Series & G-Series
- BMW S55 F-Series
- BMW S63 TU F-Series & G-Series
ATTENTION: MODE Auto Concepts assume no liability on the use or improper installation of this product. Product is for off-road / racing use only.
What's inside water injection nozzles?
![BMW Methanol Injection Nozzles by Burger Motorsports for JB4 integration](https://cdn.shopify.com/s/files/1/0890/2048/files/Exploded-Methanol-nozzle-2_1024x1024.png?v=1549580745)
Methanol Injection Nozzle guide
N20/N26: Single BM7
N54/N55 with factory turbo(s): Single BM10 or Dual BM5
N54/N55 with larger hybrid turbo(s): Single BM12 or dual BM7
B48 with factory or larger turbo: Dual BM5
B58 with factory or larger turbo: Dual BM7
S55 with factory turbo(s): Dual BM5
S55 with larger hybrid turbo(s): Dual BM7
s63tu with factory or larger turbos: Dual BM10
2 gal. UNIVERSAL LOW PRO TANK
2 gallon universal low profile tank
With our 2 gallon universal tank the WMI pump mounts directly to the tank for the ultimate easy to install tank. This tank is compact allowing for a wide range of mounting on any horizontal surface in the trunk. Offered in black and in clear to allow visually checking the fluid level. Works with all DDP 5800 pumps. Made in USA.
Comes with standard 2 way vented black plastic cap.
Upgraded billet lid with 1-way check valve available below.
Tank dimensions: L 15.5" x W 8" x H 8.25"
Applications
Universal trunk mount
Optional Upgraded Billet WMI tank cap w/safety check valve
The Burger Motorsports custom billet WMI cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes from getting out! Made in the USA.
![Burger Motorsports Methanol injection tank cap caps lid check valve](https://cdn.shopify.com/s/files/1/0890/2048/files/WMI-Billet-Methanol-Caps-lid-burger-motorsports-tank-cap_1024x1024.jpg?v=1594797086)
CAP UPGRADE
Optional Upgraded Billet WMI tank cap w/safety check valve
This high quality custom billet WMI cap includes an integrated check valve to let air in and prevent dangerous WMI vapor/fumes from getting out! Made in USA.
Applications
• BMS 1 gallon tank
• BMS 2 gallon universal tank
• BMS 2 & 3 gallon stealth tank
INSTALL GUIDE
Download Install GuideProduct title
Vendor
$19.99 AUD | $24.99 AUD
Product title
Vendor
$19.99 AUD | $24.99 AUD
Product title
Vendor
$19.99 AUD | $24.99 AUD
Product title
Vendor